Normal Use; General Instructions - BIANCHI VENDING ARIA L Slave Manual Del Usuario

1.0 TECHNICAL CHARACTERISTICS (FIG. 1.1)
Height (C) mm
Width (A) mm
Depth * (B) mm
Weight kg
Power frequency
Power frequency **
Electrical supply connection
Electrical supply connection **
Electrical supply connection **
* maximum overall dimensions of the PULL
** Special versions for the domestic market
The electrical features and refrigeration of each model are shown
on the rating plate attached to the outside.
REFRIGERATOR UNIT
Evaporator
Refrigerator unit
Refrigerant gas
Compressor
(1)
Charge gas
Type of door lighting
Noise level
Verify the correspondence data on the rating plate located on the
(1)
compressor.
CAUTION!
The refrigeration compressors contain pressurized gas
KNOWING THE DISTRIBUTOR
1 Product drawers
2 Spiral
3 Cooling unit
4 Dispensing chamber
5 Power board
6 Fuses
7 Power supply unit
8 Lighting
9 Door
10 Electronics board CPU

1.1 Normal use

The distributor is to be used solely for the sale and distribution of pre-packed
products (confectionery, crisps, cans, bottles, briks etc.).
Follow the manufacturer's indications regarding the consume-by dates of the
products and the storage temperature.
Instructions
for the user
ARIA L ARIA M
Slave Slave
1830 1630
700 700
815 815
200 190
220-230V; 50Hz
220V; 60Hz
CEE 7/7 plug
NBR 14136:2001 plug
IRAM 2073 10A plug
ventilated
Climatic class N
R134A
NE K 6187Z (Embraco)
200g
LED
LpA < 70 dB(A)
(Fig.1.2)
2.0 PREMISE
2.1 - Important notices for operator
This automatic distributor has been designed and constructed in full accord-
ance with current safety regulations and is therefore safe for those who fol-
low the ordinary filling and cleaning instructions as indicated in this manual.
The user must not under any circumstances remove the guards that
require a tool for removal.
Some maintenance operations (to be done solely by specialized technicians
and indicated in this manual with a special symbol) require that specific
safety protections of the machine must be switched off .
In accordance with the current safety regulations, certain operations are
the exclusive responsibility of the installation technician, and the ordinary
maintenance technician may have access to specific operations on with
specific authorization.
The acquaintance and absolute respect, from a technical point of view, of
the safety instructions and of the danger notices contained in this manual,
are fundamental for the execution, in conditions of minimum risk, for the
installation, use and maintenance of this machine.
2.2

General Instructions

Knowledge of the information and instructions contained in the
present manual is essential for a correct use of the automatic
vending machine on the part of the user .
– Interventions by the user on the automatic vending machine are allowed
only if they are of his competence and if he has been duly trained.
The installation technician must be fully acquainted with all the mecha-
nisms necessary for the correct operation of the machine.
– It is the buyer's responsibility to ascertain that the users have been trained
and are informed and regulations indicated in the technical documentation
supplied.
Despite the full observance of the safety regulations by the constructor,
those who operate on the automatic dispensers must be fully aware of
the potential risks involved in operations on the machine.
– This manual is an integral part of the equipment and as such must always
remain inside of the same, so as to allow further consultations on the
part of the various operators, until the dismantlement and/or scrapping
of the machine.
– In case of loss or damage of the present manual it is possible receive a
new copy making application to the manufacturer, with prior indication
of the data registered on machines' serial number.
– The functional reliability and
guaranteed only if original parts are used.
– Modifications to the machine not previously agreed on with the construction
company and undertaken by the installation technician and/or manager,
are considered to be under his entire responsibility.
All the operations necessary to maintain the machine's efficiency, before
and during it's use are at the users charge.
– Any manipulations or modifications made to the machine that are not
previously authorized by the manufacturer, relieve the latter from any
responsibility for damages deriving from, and will automatically result
in the cancellation of the machine guarantee terms.
– This manual reflects the status at the moment of the emission of the
automatic vending machine on the market; possible modifications, upgrad-
ing, adaptments that are done the machine and that are subsequently
commercialized do not oblige Bianchi Industry neither to intervene
on the machine previously supplied, nor, neither to update the relative
technical documentation supplied together with the machine.
– It is however Bianchi Industry's faculty, when deemed opportune and
for valid motives, to adjourn the manuals already present on the market,
sending to their customers adjournment sheets that must be kept in the
original manual.
14
ENGLISH
optimization of machine's services are