ACCESSING AND POURING
NOTE: Use on bottles with natural cork
(remove foil to confi rm), or on screw cap
bottles using Coravin Screw Caps.
NOTE: Ensure the Needle is tight
by twisting clockwise.
NOTE: Make sure Clamp is in the down
position before use.
Open the Clamp by squeezing the Clamp
1
Handles together. Place around the neck
of the bottle so the Needle Guide rests
on top of the foil/cork. Release Clamp
Handles to secure on the bottle.
Quickly PRESS AND RELEASE the
2
Trigger to purge air out of the Needle
and fi ll it with gas. The System will
emit a quick hissing sound.
Push down on the Handle to insert the
3
Needle all the way through the cork.
WINE
1
2
3
7
Hold the bottle with one hand and
4
the Handle with the other. Tilt the
bottle until the Spout is over the
glass and the back of the bottle is
raised higher than the Spout.
Quickly PRESS AND RELEASE the
5
Trigger to pour wine. Once the Trigger
is released, wine will pour for several
seconds. Repeat until the desired
amount of wine is poured.
Tip the bottle upright to stop wine from
6
pouring. Any remaining gas in the bottle
will be released and a hissing sound
may be heard.
NOTE: To optimize gas usage, allow the
pour to slow before pressing the Trigger
again. Lots of hissing indicates too
much gas was used.
4
5
8