GENERGY LIMITED3000 Instrucciones De Uso página 40

4.2 Transportation kit assembly.
Fix the wheels according to the lower figure: Cross the wheel (2) with the shaft (3),
pass the end of the shaft through the hole provided in the generator frame for this
purpose. Finally fix the shaft with the pin (1
Fix the transport wheels and support feet
according to the figure on the right.
Attach the rubber feet (4) to the bracket foot
(3) using the M6x18 screws (5) and the M6
nuts (2).
Once the bracket foot is assembled, fix it to
the machine frame using the M8 x18
screws (6) and the M8 nuts (1).
)
Fix the handles according to the
figure on the left.
Place the transport brackets (3) on
the frame by matching the holes in
the handle and the beater.
Cross the holes with the pins (2) and
fix them at the other end with the pin
R (1).
39