GENERGY LIMITED3000 Instrucciones De Uso página 46

3 Place the engine's ignition switch to "ON"
4 Pull the startup handle slowly and until the end to calculate the maximum
length of the rope (and do not exceed it later when pulling vigorously), then
allow the rope to coil back.
Pull softly again until you notice slight resistance, now allow the rope to coil
back and pull vigorously to start up the engine.
If you were unable to start up in the first try, repeat the operation.
NOTE: If you reach the end of the rope length abruptly you could damage
the handle or rope spring and it wouldn't be covered by warranty.
NOTE: Do not let go of the handle after pulling to prevent the handle from
hitting the machine. Move your hand along with the handle until it has coiled
back completely.
NOTE: Never pull the rope again if the generator is already running and
turning.
45