How To Test; Maintenance; Cleaning; Specifications - Beha-Amprobe EVC-13 Manual Del Usuario

HOW TO TEST

For operation please refer to instruction manual of the relevant test equipment to be used.

MAINTENANCE

When using the test accessory in compliance with the user manual, no special maintenance is required. However,
should functional errors occur during normal operation, the after sales service will repair your accessory. Please
contact the local service office.

CLEANING

If the accessory needs to be cleaned after daily usage, use a wet cloth and a mild household detergent.
Prior to cleaning, disconnect the test cable from all measurement circuits.
Never use acid-based detergents or dissolvent liquids for cleaning.
After cleaning, do not use the accessory until it is dried completely.

SPECIFICATIONS

Type
Description
Input voltage
Length
Weight
CE directive
Safety
EMC
Working temperature range
Storage temperature range
Reference humidity range
Working humidity range
Pollution degree
Measurement category
Altitude above sea level
EVC-13 Test Cable
AC charging mode 3, suitable to
IEC 62196-2 type 1 or SAE J1772
with vehicle connector
(type 1, 5P single-phase)
Up to 250 V (single phase system) /
up to 430 V (three phase system), 50/60 Hz, max 10 A
590 mm (including both connectors)
Approx. 550 g
Low Voltage Directive LVD 2014/35/EU
IEC/EN 61010-1:2010
IEC/EN 61010-2-031:2015
Not applicable
0 ... +40 °C
-10 ... +50 °C
10 ... 60% relative humidity w/o condensation
10 ... 85% relative humidity w/o condensation
2
CAT II 300 V
2000 m max.
4
EVC-20 Test Cable
AC charging mode 3, suitable to
IEC 62196-2 type 2 socket outlet or
fixed cable with vehicle connector
(type 2, 7P three-phase)