Parts And Components - WAGNER CONTROL PRO 190 Manual Del Propietário

PARTS AND COMPONENTS

1
2
3
4
5
6
7
8
9
# ITEM
1 Hose wrap
2 Tool box
3 Pressure control knob /
ON/OFF switch
4 PRIME/SPRAY knob
5 Spray hose port
6 Pail bracket
7 Material return tube
8 Suction tube
9 Inlet filter
10 Spray gun
11 Tip guard
12 Spray tip
13 Gun filter
14 Spray hose
15 Pusher stem
16 Pressure gauge
6
11
1
2
8
7
3
9
5
4
DESCRIPTION
The hose wrap allows for easy storage of the spray hose (cart models only).
The Tool Box provides a place for items such as extra spray tips or wrenches.
The pressure control knob regulates the amount of force the pump uses to push the fluid and can be
adjusted for desired spray pattern. Also used to switch the pump ON / OFF.
The PRIME/SPRAY knob directs material to the material return tube when set to PRIME or to spray hose
when set to SPRAY.
The connection between the pump and the spray hose.
The pail bracket allows for easy transport of the material container (cart models only).
Fluid is sent out through the return tube and back into the original container when the PRIME/SPRAY
knob is in the PRIME position.
The suction tube draws the fluid from the original container into the pump.
The inlet filter is designed to prevent any debris that may be in the spray material from entering the pump.
The spray gun controls the delivery of the material being pumped.
The spray guard reduces the risk of injection injury.
The spray tip atomizes the spray material and forms the spray pattern.
The gun filter prevents any impurties in the spray material from clogging the spray tip.
The spray hose connects the spray gun to the pump.
The pusher stem is designed to free the inlet valve which may become stuck due to dried materials. The
pusher stem is activated manually by the user.
*Not included in all units. The pressure gauge measures the fluid pressure output of the pump.
10
12
13
EN
16
5
14
4
PRIME
SPRAY
SPRAY
PRIME
15