ENGLISH
AFTER USING THE MACHINE
After working, before leaving the machine:
1.
Turn the parking lever (24, if equipped) to position (24b).
2.
Disconnect the power supply cable (10) from the electrical mains and place it on the holder (7).
3.
Empty the tanks (14 and 16) as shown in the previous paragraph.
4.
Perform the daily maintenance procedures (see the Maintenance chapter).
5.
Store the machine in a clean and dry place.
MACHINE LONG INACTIVITY
If the machine is not going to be used for more than 30 days, proceed as follows:
1.
Perform the procedures shown in After Using the Machine paragraph.
2.
Store the machine in a clean and dry place.
FIRST PERIOD OF USE
After the fi rst 8 hours, check the machine fastening and connecting parts for proper tightening. Check the visible parts for integrity
and leakage.
14
14
24
7
10
16
24b
Operator's Manual - Vantage 13
P100310