Advanced Feature; Priority Check; Time -Out Timer Tot; Busy Channel Lock -Out Bclo - Vertex Standard VX-351PMR446 Manual De Instrucciones

You may set the following features in each operating chan-
nel via the CE95 Programming Software independently.
D S
IAL CAN
When set the CH selector knob to the channel which a
Dial Scan feature was assigned, the scanner begins auto-
matically.
P C
RIORITY HECK
The Priority Check feature checks a User-assigned Prior-
ity Channel every five seconds, when the scanner stopped
on the channel except the User-assigned Priority Chan-
nel.
T -O T TOT
IME UT IMER
The TOT feature provides a safety switch, which limits
transmission time to a pre-programmed value. This will
conserve battery power by limiting the length of trans-
missions. When your transmission time is within 10 sec-
onds of the Time-Out Timer expiration, an alert bell will
provide an audible warning from the speaker.
B C L
USY HANNEL OCK
The BCLO feature prevents the radio's transmitter from
being activated if a signal strong enough to break through
the "noise" squelch is present.
Page 10
A
DVANCED
-O BCLO
UT
F
EATURE
ARTS A R
UTO ANGE
This system is designed to inform you when you and an-
other ARTS-equipped station are within communication
range.
During ARTS operation, your radio automatically trans-
mits for about 1 second every 55 seconds in an attempt to
shake hands with the other station.
If you are out of range for more than 2 minutes, your ra-
dio senses that no signal has been received, three short
beeper will sound. If you subsequently move back into
range, as soon as the other station transmits, a short beeper
will sound.
P S
OWER AVE
The Power Save feature puts the transceiver to sleep for a
time interval, periodically "waking it up" to check for
activity. If somebody is talking on the channel, the trans-
ceiver will remain in the "active" mode, then resume its
"sleep" cycles when the signal drops. This feature signifi-
cantly reduces quiescent channel battery drain.
T S
RANSPOND YSTEM