Elettric Saw Components; Safety Precaution - Intertek Efco MT2200 Manual De Instrucciones

2. ELECTRIC SAW COMPONENTS
(Fig. 2)
I
1. Safety button
2. On/off switch
GB
3. Chain brake lever
4. Guide bar
5. Chain
F
6. Oil tank cap
7A. Chain guard fastening knob
7B. Chain tensioner ring
D
8. Chain cover
9. Battery compartment
E
10. Front handle
11. Rear handle
12. Oil level
SK
13. Bar cover
P
3. SAFETY PRECAUTIONS
General Power Tool Safety Warnings
GR
WARNING - Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in electric
TR
shock, fire and/or serious injury.
Save all warnings and instructions for future
CZ reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
RUS
battery-operated (cordless) power tool.
UK
1) Work area safety
a) Keep work area clean and well lit.
PL
Cluttered or dark areas invite accidents.
b) D o n o t o p e r a t e p o we r t o o l s i n
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away
w h i l e o p e r a t i n g a p o w e r t o o l .
Distractions can cause you to lose control.
22
2) Electrical safety
a) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
b) Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing
a n d u s e c o m m o n s e n s e w h e n
operating a power tool. Do not use a
power tool while you are tired or under
the influence of drugs, alcohol or
medication. A moment of inattention
while operating power tools may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safet y shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying
the tool. Carrying power tools with your
finger on the switch or energising power
tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g) I f d e v i ce s a re p rov i d e d fo r t h e