Ceiling Mounting - Rockwell Automation Allen Bradley InView Serie Manual De Instalación

Ceiling Mounting

Remove
this screw.
1. Remove one screw from the top of the end cap.
2. Line up a ceiling bracket with the top hole on the sign's end cap
so the bracket fits in the indentation. There are left and right
ceiling brackets. Use the one that fits with the screw hole's
countersunk side facing out. Secure the ceiling bracket with the
screw removed in Step 1. Torque the screws to 2.7 Nm
(24 in-lb).
Screw hole Screw
Ceiling
bracket
3. Repeat steps 1 and 2 for the other end of the sign.
4. Use chains (not supplied) to hang the sign from a ceiling.
Use chains capable of supporting 4 times the total
TIP
weight of the sign(s).
The hole you select in the ceiling bracket for the
TIP
chain determines the angle at which the sign hangs.
InView Marquee Message Display
Ceiling
bracket
mounted to
end cap.
Publication 2706-IN006E-EN-P
9