Max/Min Button - Trotec SL 300 Manual De Instrucciones

1 Windshield
2 .LCD display
MX:freezes.the.maximum.value
MN: freezes.the.minimum.value
OVER:.measured.value.exceeds.the.upper.limit.value
UNDER:.measured.value.lies.below.the.minimum.
. limit.value
F:.fast.response.time
S:.slow.response.time
dB (A):.display.in.dB(A) .
dB (C):.display.in.dB(C) .
88:.Display.(01.-.04).measuring.range.selection
REC:.a.measurement.is.in.progress
FULL: the.memory.is.full
HOLD:.freezes.the.measured.value
:.indicates.that.the.battery.is.low.and.must.soon.be.
- +
. replaced
3 On/Off button and background lighting
Press.the.On/Off.button.once.to.switch.the.appliance.on . .
To.activate.the.background.lighting,.briefly.press.the.same.
button.once.more . . To.switch.the.appliance.off,.keep.the.
button.pressed.for.an.extended.period . . A.countdown.ap-
pears.on.the.display:.P-3,.P-2,.P-1.(still.keep.the.On/Off.
button.pressed).and.the.appliance.switches.itself.off .
4 A/C button
Press.this.button.to.select.the.dB(A).or.dB(C).measuring.
curve.respectively . .
5 HOLD button
Data hold function
Press.the.button.once.to."freeze".the.current.measured.
value . . Press.the.button.again.to.resume.the.measurement.
procedure .
Deletion of data
Press.and.hold.the.hold.button.before.switching.the.ap-
pliance.on.(it.is.only.necessary.to.press.the.On/Off.button.
briefly) . . Release.the.hold.button.as.soon.as.the.appliance.
is.switched.on.and.the.letters."CLR".(clear).appear.on.the.
display . . These.letters.indicate.that.the.data.memory.has.
been.cleared . .
G
OPERATING INSTRUCTIONS – SOUND LEVEL METER SL300
6 Level stages and recording functions
Level selection
Press.the.level.button.once.in.each.case.to.move.from.
one.level.to.another . . Press.the.button.once.in.each.case.
to.move.from."Lo".(low).(01).to."Med".(medium).(02).and.
then.to."Hi".(high).(03).and."Auto".(04).and.from.there.
back.to."Lo" .
Recording function
First.of.all,.press.the.hold.button.to.freeze.the.value.
on.the.display . . Then.press.the.recording.button.(REC).
in. order. to. save. the. value. to. the. data. memory . . The.
procedure. was. successful. if. the. abbreviation. "REC".
appears.on.the.display . . Press.the.hold.button.again.to.
resume.the.measuring.procedure .
Reading the data.
Keep. the. recording. button.
(REC). pressed. with. the. ap-
pliance. switched. off. whilst.
pressing. the. On/Off. button.
until. the. word. "DATA". ap-
pears. on. the. display . . Scroll. through. the. measured.
values. in. the. memory. using. the. recording. button.
(REC).and.press.the.MAX.or.HOLD.button.to.read.out.
the. date. and. time. of. the. data. recording . . Press. REC.
to.move.to.the.next.data . . Press.F/S.to.exit.from.this.
mode .
7 .MAX/MIN button
Freeze.the.maximum/minimum.value.(hold.function) . .
Press.the.Max/Min.key.once.in.order.to.enter.the.ma-
ximum/minimum.value . . First,.the.abbreviation."MAX".
appears . . The.maximum.value.is.frozen.and.remains.
frozen.until.a.higher.value.is.measured . . Press.the.but-
ton.again . . The.abbreviation."MIN".appears;.the.mini-
mum.value.is.frozen.and.stored.until.a.lower.value.is.
measured . . Press. the. button. once. more. to. exit. from.
MAX/MIN.mode .
8 .F/S button(fast/slow)
FAST:.fast.sampling.rate.-.approx . . once.every.125.ms.
SLOW:.slow.sampling.rate.-.approx . . once.per.second
Test Data
Data Number
d B A
B - 2