Automatically Sizing And Centering The Picture (Auto); Adjusting The Size Of The Picture (Size); Adjusting The Centering Of The Picture (Center); Enlarging Or Reducing The Picture (Zoom) - Sony CPD-G500 Manual De Instrucciones

Automatically sizing and centering
the picture (AUTO)
You can easily adjust the picture to fill the screen by using the
(AUTO) item in the SIZE/CENTER menu.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
CENTER and press the center of the control button
again.
The SIZE/CENTER menu appears on the screen.
First move the control button m m m m /M M M M to select
3
(AUTO). Then move the control button ,
The picture automatically fills the screen.
Notes
• This function is intended for use with a computer running Windows or
similar graphic user interface software that provides a full-screen
picture. It may not work properly if the background color is dark or if
the input picture does not fill the screen to the edges (such as an MS-
DOS prompt).
• Pictures with an aspect ratio of 5:4 (resolution: 1280 × 1024, 1600 ×
1280) are displayed at their actual resolution and do not fill the screen
to the edges.
• The displayed image moves for a few seconds while this function is
performed. This is not a malfunction.
Adjusting the size of the picture
(SIZE)
This setting is stored in memory for the current input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
press the center of the control button again.
The SIZE/CENTER menu appears on the screen.
First move the control button m/M to select
3
horizontal adjustment, or
adjustment. Then move the control button </, to
adjust the size.
SIZE or
, .
, ,
SIZE and
for
for vertical
Adjusting the centering of the
picture (CENTER)
This setting is stored in memory for the current input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
and press the center of the control button again.
The SIZE/CENTER menu appears on the screen.
First move the control button m/M to select
3
horizontal adjustment, or
Then move the control button </, to adjust the
centering.
Enlarging or reducing the picture
(ZOOM)
This setting is stored in memory for the current input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
CENTER and press the center of the control button
again.
The SIZE/CENTER menu appears on the screen.
Move the control button m/M to select
3
and move </, to enlarge or reduce the picture.
Note
Adjustment stops when either the horizontal or vertical size reaches its
maximum or minimum value.
CENTER
for
for vertical adjustment.
SIZE or
(zoom),
11
GB