Adjusting The Quality Of The Picture (Screen); Adjusting The Color Of The Picture (Color) - Sony CPD-G500 Manual De Instrucciones

Adjusting the quality of the picture
(SCREEN)
The SCREEN settings allow you to adjust the quality of the
picture by controlling the moire and landing.
• If the color is irregular at the corners of the screen, adjust the
landing.
• If elliptical or wavy patterns appear on the screen, cancel the
moire.
The CANCEL MOIRE and MOIRE ADJUST settings are stored
in memory for the current input signal. All other settings are
stored in memory for all input signals.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
and press the center of the control button again.
The SCREEN menu appears on the screen.
First move the control button m/M to select the
3
desired adjustment item. Then move the control
button </, to make the adjustment.
Select To
reduce any color irregularities in the
screen's top left corner to a minimum.
LANDING
reduce any color irregularities in the
screen's top right corner to a
LANDING
minimum.
reduce any color irregularities in the
screen's bottom left corner to a
LANDING
minimum.
reduce any color irregularities in the
screen's bottom right corner to a
LANDING
minimum.
turn the moire cancellation function
ON or OFF.
CANCEL MOIRE*
(MOIRE ADJUST) appears in
the menu when you select ON.
adjust the degree of moire
cancellation until the moire is at a
MOIRE ADJUST
minimum.
* Moire is a type of natural interference which produces soft, wavy lines
on your screen. It may appear due to interference between the pattern
of the picture on the screen and the phosphor pitch pattern of the
monitor.
Example of moire
Note
The picture may become fuzzy when CANCEL MOIRE is set to ON.
Adjusting the color of the picture
(COLOR)
The COLOR settings allow you to adjust the picture's color
temperature by changing the color level of the white color field.
Colors appear reddish if the temperature is low, and bluish if the
temperature is high. This adjustment is useful for matching the
monitor's color to a printed picture's colors.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
press the center of the control button again.
The COLOR menu appears on the screen.
Move the control button <
3
SCREEN
adjustment mode.
There are three types of adjustment modes, EASY, EXPERT
and sRGB.
First move the control button m/M to select the
4
desired adjustment item. Then move the control
button </, to make the adjustment.
Adjust the selected mode according to the following
instructions.
EASY mode
Move the control button m m m m /M M M M to select the color
1
temperature row 1
< /, < < < , , , to select a color temperature.
The preset color temperatures are 5000K, 6500K, and 9300K.
Since the default setting is 9300K, the whites will change
from a bluish hue to a reddish hue as the temperature is
lowered to 6500K and 5000K.
2
If necessary, fine tune the color temperature.
Move the control button m m m m /M M M M to select the color
temperature row 2
< < /, < < , to fine tune the color temperature. , ,
If you fine tune the color temperature, the new color settings
are stored in memory for each of the three color temperatures
and item 1 of the on-screen menu changes as follows.
• [5000K]t[
• [6500K]t[
• [9300K]t[
< /, < < , , to select the ,
COLOR
EASY EXPERT s R G B
5 0 0 0 K 6 5 0 0 K 9 3 0 K 0
5 0 0 0 K
I MAGE
RES TORA T I ON ON
1 . Then move the control button
1 1
2 2 2 . Then move the control button
1]
2]
3]
COLOR and
GB
(continued)
13