9circle 9CL-91030 Manual De Usuario página 2

®
3/8" DR TWIST SOCKET SET
1. FEATURES
• The twist sockets are especially helpful when the screw nuts are worn or rusted.
• The sockets are designed to be used with ratchet wrenches. Never use them with an air wrench.
2. PRECAUTIONS
• Always read completely the instruction manual before working.
• Do not use impact tools to operate these sockets.
• Never use the tool in the areas that it is not designed for.
• DO NOT use the twist sockets to install new nuts.
CAUTION
• Always wear eye protection that meets OSHA and ANSI Z87.1 standards.
• Always wear hand gloves when working with the tool.
• Ensure the work area has adequate lighting.
• Keep children and unauthorized persons away from the work area.
• Keep work area clean and tidy and free from unrelated materials.
• DO NOT allow untrained persons to use the kit.
3. SPECIFICATIONS
• The material used is G43400 (UNS) or SNCM439 (JIS), a type of highly hardened alloy steels.
• 9 sockets with the followed sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 19mm.
• Includes a punch bar to punch nuts stuck tightly in the socket.
• Use a 3/8" Driver to operate the socket.
4. INSTRUCTIONS
Step 1 Choose a suitable-sized socket
Step 2 Use a wrench to unfasten the nut anticlockwise (Fig. 2).
Step 3 Use the punch bar to punch nuts stuck tightly in the socket (Fig. 4).
www.9circleint.com
EN