Inserting The Instrument; Volume Adjustment; Remove The Instrument - Microson M34 Digital Serie Manual De Uso

INSERTING THE INSTRUMENT

1. Hold your hearing aid with
your thumb and your index
finger and place it carefully in
the ear canal. Move the outer ear
slightly upwards or downwards
to help.
2.
completely
gently. The hearing aid must
feel to be properly in place.

REMOVE THE INSTRUMENT

3. To take your hearing aid out,
pull the ear lobe to loosen the
hearing aid in the ear canal.
Use the other hand to open the
battery holder and pull gently on
the hearing aid to remove it.
NOTE: If your device has an
extractor, take hold of the end
and pull the hearing aid slowly
until it has been removed.
EN
Insert the hearing
by pushing
16
aid
+
very

VOLUME ADJUSTMENT

m34 Digital ITC:
The volume control enables you to
connect, disconnect and adjust the
amplification of your hearing aid.
Use your finger to turn the volume
control wheel, as shown in the figure.
To switch it off, turn the volume
control backwards until it can go no
further or until the mark has been
reached.
m34 Digital CIC:
The volume control should be ajusted
by your specialist.
WAX FILTER CLEANING
Your hearing aid is equipped
with the latest-generation filter
for preventing wax filter. Follow
the instructions to ensure the most
effective maintenance:
Press down lightly, sliding it at the
same time, as shown in the figures.
Perform this operation once or
twice a day on a suitable surface*.
*(Consult your specialist)
17
EN