Sears Kenmore W10884766B Instrucciones De Instalación página 19

Estufa a gas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Remove two screws from the bake burner.
5. Slide the front of the bake burner to the side to remove tab
from front of oven. Lift the back of the bake burner off the
oven orifice and set the bake burner aside. Do not
disconnect the wire.
A. Bake burner
B. Screws
A. Oven orifice
6. Apply masking tape to the end of a 3/8" (10 mm) nut driver
to help hold the gas orifice spud in the nut driver while
changing it. Press nut driver down onto the gas orifice spud
and remove by turning the Propane gas bake burner orifice
spud counterclockwise to remove. The spud will be stamped
with a "56."
7. Replace the "56" spud with a "47" spud. Install the Natural
gas bake burner orifice spud, turning it clockwise until snug.
IMPORTANT: Do not overtighten.
A. Orifice spud
A
B
A
A
8. Position the back of the bake burner over the oven orifice,
and then align the holes for the screws.
9. Reattach the bake burner with two screws.
10. Position the front of the oven bottom panel toward the front
frame, and then lower the rear of the oven bottom panel
into the oven.
11. Reattach the oven bottom panel with two screws and
two washers.
To Convert Oven Broil Burner (Propane Gas
to Natural Gas) (on some models)
1. Remove one screw from the broil burner.
2. Remove the flame spreader.
3. Remove the broil burner from the broil burner orifice hood.
NOTE: The broil burner will hang in the back of the oven
while you are changing the orifice hood.
A
B
A. Broil burner
B. Flame spreader
C. Screws
D. Orifice hood
4. Apply masking tape to the end of a 3/8" (10 mm) nut
driver to help hold the gas orifice spud in the nut driver
while changing it. Press nut driver down onto the gas orifice
spud and remove by turning the Propane gas broil burner
orifice hood counterclockwise to remove. The hood will be
stamped with a "100."
5. Replace the "100" hood with a "155" hood. Install the
Natural gas broiler burner orifice hood, turning it clockwise
until snug.
IMPORTANT: Do not overtighten.
A. Orifice hood
C
D
A
19

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido