Ce Declaration Of Conformity - WALKER FILTRATION WS Manual De Instrucciones

CE DECLARATION OF CONFORMITY

Walker Filtration Ltd declare under our sole responsibility that this product is in
conformity with the following directive:Pressure Equipment Directive 97/23/EC.
Brian Walker
Name: .............................................................................
Executive Chairman
Position:...........................................................................
Threaded filter housings
Housing Category / Assessment Route
Model SEP
A20
D20
A30
D30
D45
A55
A76
A105
A106
A126
A153
A203
A205
A250
A305
A306
A308
Water Separators
Housing Category / Assessment Route
Model SEP
A20WS
A30WS
A50WS
A75WS
A100WS
A125WS
A150WS
A200WS
A250WS
A300WS
Notified body: Lloyds Register EMEA, 71 Fenchurch Street, London, EC3M 4BS
I/Module A II/Module D1
I/Module A II/Module D1
Signed: ............................................................................
February 2005
Date: ...............................................................................
The Pressure Equipment Directive 97/23/EC came into
effect on 30 May 2002. Most pressure equipment and
assemblies placed on the market in the United Kingdom
must comply with the Regulations. Under the
Regulations, pressure equipment and assemblies above
specified pressure/volume thresholds must:
• be safe;
• meet essential safety requirements covering design,
manufacture and testing;
• satisfy appropriate conformity assessment procedures;
and
• carry the CE marking and other information.
Pressure equipment and assemblies below the specified
pressure/volume thresholds must:
• be safe;
• be designed and manufactured according to sound
engineering practice; and
• bear specified markings (but not the CE marking)