Product Overview; Assembly And Set-Up - Xiaomi Mi Electric Scooter Pro Manual De Usuario

2. Product Overview

Handlebar
Headlight
Brake Lever
Stem
Folding Mechanism
Front Fork
Wheel Motor
Charging Port
Control Panel & Power Bu on
Speedometer: Display the current speed of the scooter, as well as to display error codes.
Modes: Three riding modes available. "ECO" for Energy Saving mode (top speed approx. 15 km/h, smooth thro le, suitable for
beginners), "D" for Standard mode (top speed approx. 20 km/h) and "S" for Sport mode (top speed approx. 25 km/h,
powerful, only recommended for skilled riders).
Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device.
Error: The wrench icon indicates that the scooter has detected an error.
Ba ery Level: The ba ery power is indicated by 5 bars, each representing approximately 20 % of a full ba ery.
Power Bu on: Press the bu on to turn the scooter on, and press and hold the bu on for 3 seconds to turn the scooter off. When
the scooter is on, press the bu on to turn the headlight on/off, and double press to switch between modes.
03
Accelerator
Control Panel & Power Bu on
Scooter Bell Lever
Scooter Bell
Quick Release Lever
Buckle
Mudguard
Brake Light
Disc Brake
Kickstand
Ba ery
Compartment

3. Assembly and Set-Up

1. Fold the handlebar stem up, fasten it, and
put down the kickstand.
3. Tighten the screws onto both sides of the
stem with the T-shaped Allen key.
2. Install the handlebar onto the stem.
4. A er the assembly, press the power
bu on to check if it's working properly.
04