9. Daily Care and Maintenance
Cleaning and Storage
If you see stains on the scooter's body, wipe them off with a damp cloth. If the stains won't scrub off, put on
some toothpaste, and brush them with a toothbrush, then wipe them off with a damp cloth. If you see
scratches on plastic parts, use sandpaper or other abrasive materials to polish them.
Notes: do not clean the scooter with alcohol, gasoline, kerosene or other corrosive and volatile chemical
solvents to prevent dire damage. Do not wash the scooter with a high-pressure water spray. During cleaning,
make sure that the scooter's turned off, the charging cable is unplugged, and the rubber flap is closed as water
leakage may result in electric shock or other major problems.
When the scooter's not in use, keep it indoors where it is dry and cool. Do not put it outdoors for long time.
Excessive sunlight, overheating and overcooling accelerate tire aging and compromise the scooter and the
ba ery pack's lifespan.
Tire Maintenance
Regularly check the tire pressure (at least every 2-3 months), the recommended tire pressure is 50 psi. Riding
with an incorrect tire pressure reduces tire life and safety.
Maintenance and removal of the ba ery
Do not remove the ba ery. Removing the ba ery is complicated and can alter the operation of the machine:
You can contact an authorized repairer if the product is still guaranteed. If the product is not guaranteed you
can contact any specialized repairer of your choice. You can ask for the list of the authorized repairers to the
customer service available at www.mi.com. For any further question, you can contact the customer service
available at www.mi.com.
Spare tires supplied with the product are to be mounted on the wheel by a professional repairer. Removing the
wheels is complicated and incorrect assembly can lead to instability and malfunctions:
– Please contact an authorized repairer if the product is still under manufacturer guarantee. You can ask for
the list of the authorized repairers to the customer service available at www.mi.com.
– If the product is no longer under guaranteed you can contact any specialized repairer of your choice.
– Should you have questions, you can contact Xiaomi's customer service available at www.mi.com.
1. Do not use ba ery packs of other models or brands, as there may be a safety risk.
2. Do not disassemble, squeeze or puncture the product. Do not touch its ba ery contacts. Do not disassemble
or poke the outer casing. Do not place the product into water, fire nor expose it to temperatures above 50°C
(including heat sources such as stoves, heatings, etc.). Avoid metal objects from touching the ba ery
contacts, since this may result into short circuits, physical injury or even death.
15
3. Any water ge ing into the ba ery may cause damage to the internal circuit, risk of fire or even explode. If
there is any suspicion of water ge ing into the ba ery, immediately stop using the ba ery and return it to
the A er Sales service for inspection.
4. Only use the original charging adapter to avoid potential damage or fire.
5. Improper disposal of used ba eries can seriously pollute the environment. Observe local regulations when
disposing of this ba ery pack. Do not discard this ba ery pack at will, to protect the natural environment.
6. Fully charge a er every use, in order to extend its ba ery life.
Do not place the ba ery in an environment where the ambient temperature is higher than 50°C or lower than
-20°C (e.g., do not leave the scooter or the ba ery pack in a car under direct sunlight for an extended time). Do
not throw the ba ery pack into fire as it may lead to ba ery failure, ba ery overheating, and even another fire.
If the scooter is expected to be le idle for more than 30 days, please fully charge the ba ery and place it in a
dry and cool place. Keep in mind to recharge it every 60 days to protect the ba ery from potential damage
which is beyond limited warranty.
Scooter shall be only be used with original ba eries and charging of the Scooter shall only be done by the
original charging adapter supplied with the Scooter (or any ba ery model or charging adapter model approved
by the manufacturer as compatible).
Always charge before exhausting the ba ery to prolong the ba ery's lifespan. The ba ery pack performs be er
at normal temperature, and poor when it is below 0°C. For instance, when it is below -20°C, the riding range is
only half or less at normal state. When the temperature rises, the riding range restores. For detailed
information, please refer to Mi Home / Xiaomi Home App.
The external flexible cable of this transformer cannot be replaced; if the cord is damaged, the transformer must
be discarded and replaced by a new one. Should you have questions, you can contact Xiaomi's customer
service available at www.mi.com.
Note: fully charged Mi Electric Scooter Pro will last for 120-180 days. The built-in intelligent chip will keep a log
of its charging and discharging records. The damage caused by prolonged no charge is irreversible and is
beyond limited warranty. Once the damage is done, the ba ery cannot be recharged (non-professionals are
forbidden to dismantle the ba ery pack, as it may cause electric shock, short circuit or even major safety
accidents).
In case of accident or breakdown: Please contact an authorized repairer if the product is still under guarantee.
If not, you can contact any specialized repairer of your choice. You can ask for the list of the authorized
repairers to the customer service available at www.mi.com. For any question, please contact Xiaomi's
customer service available at www.mi.com.
Efforts have been made to simplify wording in the user manual for users. When an action appears too
complicated for a user, he is advised to contact an authorized or a specialized repairer or Xiaomi's customer
service.
16