Descargar Imprimir esta página

Technical Specifications - Hudora Bold Wheel S Instrucciones De Montaje Y De Uso

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 6
INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the pro-
duct. Therefore, please store them and the packaging carefully in case questions arise in the
future. Please always include these instructions when handing on the product to a third party.
This product must be assembled by an adult. This product is designed for private/domestic
use only. This product is not designed for commercial/industrial use. The use of the product
requires certain capabilities and skills. Always adjust according to the age of the user and use
for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item:
Bold Wheel S (Wheel size: 125/100 mm) //
Bold Wheel M (Wheel size: 145/125 mm) //
Bold Wheel L (Wheel size: 180/145 mm) //
Bold Wheel XL (Wheel size: 205/180 mm)
Item number:
14250, 14251 // 14254, 14255 // 14252, 14253 // 14256, 14258, 14259
Dimensions:
approx. 72,5 cm in length, deck. approx. 33,5 x 11 cm //
approx. 78 cm in length, deck. approx. 33,5 x 11 cm //
approx. 91 cm in length, deck. approx. 31,5 x 12 cm //
approx. 91 cm in length, deck. approx. 31,5 x 12 cm
Product weight:
approx. 3,0 kg // 3,3 kg // 3,7 kg // 4,2 kg
Class:
A, 100 kg maximum user weight
Purpose:
Leisure scooter for use on public areas, no toy.
If you have assembly problems or would like further information on the product, we have all you
need and more at http://www.hudora.de/service.
CONTENTS
1 x Scooter | 1 x These instructions
Other parts which may be included with the delivery in some circumstances are not required.
SAFETY INSTRUCTIONS
• Wear suitable protective clothing for your own safety. Wear personal protective equipment.
This includes at least: hand/wrist guards, knee pads, head protection and elbow pads. Ne-
ver use the scooter without shoes!
• The scooter is only intended for use by one person.
• Only use the scooter on surfaces that are suitable for it, i.e. those which are flat, clean, dry,
and use the scooter where possible away from other road users. Avoid sloping ground. The
brakes may become hot if the scooter has been used for a while! Your footwear could be
damaged! The brakes shouldn't be touched until they have cooled down.
• Always be considerate of others.
• Before you begin – Ensure that all fasteners and locking parts are intact and tight, e.g. the
folding mechanism and the height setting of the handlebar. The functions of self-securing
screw threads can be impaired after repeated loosening and tightening of the connecting
elements. Check especially for the correct alignment and fastening of the steering set-up.
• Make sure that the stand (if available) is folded safely while driving.
• Do not use the scooter at twilight, at night or in poor visibility. Do not use it on roads or
thorough-fares or on slopes or hills. Avoid being in the proximity of stairs and open water.
• The scooter is not suitable for jumps.
• Prior to using the scooter, please inform yourself about restricting applicable traffic regula-
tions for the intended area of application. It is intended for use on footpaths.
• The use of the product requires specific skills and knowledge to be able to avoid injuries due
to crashes and collisions.
• Children should only use the product when they are under adult supervision.
• Ensure when riding that the logo on the handlebar points to the front or else that the push
buttons are oriented backwards.
INSTRUCTIONS ON ASSEMBLY
No tools are required to assemble the product. The scooter is delivered in its transport form
(folded)!
PLEASE PROCEED AS FOLLOWS TO GET THE SCOOTER READY FOR USE
• Push the slide control in the folding mechanism upwards. Do not thereby pull on the hand-
lebars - the system should be relaxed. The slide control will loosen. (Picture 1)
• Lift the handlebar of the scooter forwards until the controller audibly clicks into place.
(Picture 2)
• Insert the handlebar grips into the T-section of the handlebar stem. Use your thumbs
to press down both locking buttons until the the grips can be easily pushed into the
T-section. Turn the handlebar grips until the locking buttons are positioned in the two
openings intended for them and you hear them click into place. Check that both hand-
lebar grips are fitted correctly by pulling both outwards. If they do not move, they have
been assembled in accordance with the instructions. (Picture 3)
• Loosen the quick release lock on the handlebar rod by pushing the lever of the quick
release lock until the lever is parallel to the handlebar grip. (Picture 4)
• The handlebars can be locked into place at different heights. Pull the handlebar rod
out of the handlebar stem until it is at the required height and the relevant button
has snapped into place. (Picture 6) The maximum height cannot be exceeded due to
the integrated lock. If the handlebar does not sit firmly at the required height, open the
quick release lock again and turn it a few times so that the fastening bracket fits more
tightly to the handlebar rod. Repeat this process until the handlebar rod can be aligned
securely. (Picture 5)
• Now close the quick release lock by pushing the lever down to the handlebar stem.
• Always check all parts before use to ensure they are fitting tightly, particularly the
folding mechanism, the handlebar locking and the wheels.
All images are examples of the design.
TO GET THE SCOOTER READY FOR TRANSPORT AGAIN,
PLEASE CARRY OUT THE FOLLOWING ACTIONS
• Loosen the quick release lock by pushing the lever of the quick release lock away from the
handlebar stem.
• Please press the locking button so that the handlebar rod can be moved. (Picture 6)
• Push the handlebar rod as far as it will go into the handlebar stem.
• Close the quick release lock by pushing the lever down to the handlebar stem.
• Use your thumbs to press both locking buttons in the handlebar grips and pull the
handlebar grips outwards until they are released completely from the T-section.
(Picture 3)
• Push the handlebar grips down until they are parallel with the handlebar shaft.
• Push the slide control in the folding mechanism upwards. The mechanism should be loose
- to release it you should rather have a foot on the brake instead of on the foot-board!
(Picture 1)
• Fold in the scooter by moving the handle bar towards the footboard until it audibly clicks into
place.
USAGE INSTRUCTIONS
NOTHING'S EASY AT FIRST ...
... most accidents happen to "beginners" within the first ten minutes. Particular care should
be taken during this stage.
DRIVING INSTRUCTIONS
The scooter moves when a foot is used to regularly push off, just as with well-known children's
scooters. Braking is no problem either - simply step on the friction brake over the back wheel
(mudguard).
We recommend folding the scooter by hand after each use or using the stand. The side stand
is in the direction of movement located on the left hand side under the deck. Its use is ensured
through simply folding and unfolding. Aluminium is a good and light material but should also be
handled carefully as it is not as hard as steel, for example.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check
the product for damage or traces of wear and tear before and after each use. Do not make any
structural changes. For your own safety, please use original spare parts only. These can be
sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop,
the product may not be used any more. If in any doubt, please contact our service team (http://
www.hudora.de/service). You can also procure over our service wear parts such as handles,
brake plates and mud flaps. Store the product in a safe place where it is protected from the
elements, cannot be damaged, and cannot injure anyone.
Replace damaged or worn assembly parts in order to ensure the safety of your scooter.
WHEEL CHANGE
Replacement wheels are available as accessories from http://www.hudora.de/service and
should be replaced when they are worn down. To change the wheels, loosen the axle fitting
with two size 5 Allen keys and take the wheels off the axle. A screwdriver or Allen key can be
used to push the bearings out of the wheel to use them in the new wheel. However, it is usual-
ly advisable to change the bearings when the wheels are changed. Put the bearings into the
new wheel with the bolt spacer and mount them to the frame with the axle screws. Make sure
the axle has been screwed on tightly before starting again!
BEARINGS
Your kick scooter is equipped with precision ball bearings, which were filled with grease under
high pressure, during manufacture. For this reason, the rollers of the kick scooter only run
lightly and swiftly, while under load. Bearings are maintenance-free, but they are wear parts.
Caution! Worn bearings make conspicuous audible noises and their function is constrained. In
order to maintain optimal riding pleasure and to ensure lasting safety, you should replace bea-
rings, as soon as they begin to exhibit signs of being worn. In the case of full load and daily use
we recommend the replacement of the rollers and bearings twice a year. Bearings are available
as accessories under http://www.hudora.de/.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point in your
area. Local waste management companies will be able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just
as much effort into rectifying them. You can find numerous information on the product, re-
placement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/
service/.
4/8

Publicidad

loading

Este manual también es adecuado para:

Bold wheel mBold wheel lBold wheel xl142501425114252 ... Mostrar todo