Configuration; Setting The Time And Date - Sartorius YDP 20-PH Instrucciones De Manejo

Configuration

Setting the Time and Date

When the printer is turned on, i.e. when all elements on
the printer display light up,
§ press the Y key,
or during operation:
§ Press the Y key for at least 5 seconds.
> The display on the left prompts the user to input the
number of hours (HH).
You can exit the Setup mode to set the time and the date.
This also applies to all the following steps:
$ Exit the Setup mode: Depending on the menu level,
press the T key repeatedly.
You can go back one step. This also applies to the
following steps:
$ To go back one step: Press the T key.
§ Select the number of hours setting:
Press the Y key.
> The display on the left appears, the two left numbers
light up (example).
§ Set the number of hours: If required, press the I key
or the U key repeatedly.
> The display shown on the left appears (example).
9