Graef CM 80 Manual De Instrucciones página 27

Coffee Grinder CM 80 / CM 81
note
The upper mill can only be
removed if the arrow on
the latching ring and the
arrow on the motor block
face each other.
■ Use the handle to remove the
upper mill and clean it with the
brush.
Now take the latching ring off
■
the motor block and clean it with
the brush.
Also clean the bottom of the mill
■
with the small brush.
When you have finished cleaning
■
everything, put the latching ring
back on the motor block. The ar-
rows must once again point to
each other. Replace the upper
mill.
■ Turn the latching ring clockwise
until you have reached the de-
sired grind setting. (You can hear
a latching sound).
© Gebr. Graef GmbH & Co. KG - 04
EN
27