General - HBM C16M Serie Instrucciones De Montaje

General

3 General
8
HBM supplies C16M... weighing modules for max. capac­
ities 20 t up to 200 t. The tank weigh modules are mainly
designed for tank weighing applications and manufac­
tured completely from galvanized steel or stainless steel.
The tank weigh modules are fitted with integral trans­
verse retention guides which can absorb horizontal
forces, such as occur for example with tanks used with
stirring mechanisms or by wind forces. Optionally, a sim­
ple anti‐liftoff device may be installed by the user.
The modules are formed from a lower module plate for
fastening to the foundation frame, the load cell with load
transfer elements and the upper module plate for mount­
ing an the tank. A rocker pin is used for the load transfer
which provides compensation for horizontal offsets in the
applied load (in direction perpendicular to transverse
retention guides as, for example, can arise through ther­
mal strain). The weighing modules are pre‐assembled
and supplied with transport safety retainers.
A1268-3.0 HBM: public
C16M...