Metabo HPT CJ 36DA Manual De Instrucciones página 18

English
CAUTION
Do not fi x and secure the lock-off button.
Besides, keep your fi nger off the trigger switch
when the tool is being carried around. Otherwise,
the trigger switch can be inadvertently turned
ON, resulting in unexpected accidents.
(2) Trigger switch
This tool is equipped with a variable speed controlled
trigger switch. The tool can be turned "ON" or
"OFF" by squeezing or releasing the trigger. The
blade plunger stroke rate can be adjusted from the
minimum to maximum nameplate stroke rate by
the pressure you apply to the trigger. Apply more
pressure to increase the speed and release pressure
to decrease speed.
In addition, releasing the switch activates a break that
stops the blade immediately.
For continuous operation, pull the switch in all the
way and press the stopper.
To cancel continuous operation, once again pull the
switch in all the way until the stopper is freed, and
then release the switch.
Safeguard Function
Overload Protection
Temperature Protection
18
Switch
Fig. 20
Stopper
Fig. 21
LED Light Display
On 0.1 second/off 0.1 second
On 0.5 second/off 0.5 second
2. How to use the LED light (Fig. 22)
The LED light will light the area at the tip of the tool
when the switch is drawn.
The LED light will automatically power off 10 seconds
after the switch is released.
Lock off button
Switch
CAUTION
Do not look directly into the light from the LED
lamp. Continuous and direct exposure to the
light from the LED lamp can injure your eyes.
3. LED light warning signals (Fig. 23)
This product features functions that are designed
to protect the tool itself as well as the battery. While
the switch is pulled, if any of the safeguard functions
activate during operation, the LED light will blink as
described in Table 5. When any of the safeguard
functions are triggered, immediately remove your
fi nger from the switch and follow the instructions
described under corrective action.
Table 5
Remove the cause of the overloading.
Allow the tool and battery to thoroughly
cool.
LED light
Fig. 22
Fig. 23
Corrective Action