Installing Leveling Legs - Sears Kenmore 11091942710 Instrucciones De Instalación

1. Prepare dryer for leveling legs
NOTE: Slide dryer onto cardboard or hardboard before moving
toavoiddamagingfloorcovering.
Using two or more people, move dryer to desired installation
location.
Taketapeofffrontcornersofdryer.Opendryerandremove
the literature and parts packages. Wipe drum interior with damp
cloth to remove any dust.
Take two cardboard corners from the dryer carton and place
themonthefloorinbackofthedryer.Firmlygraspbodyof
the dryer and gently lay it on its back on the cardboard corners.

INSTALLING LEVELING LEGS

2. Screw in leveling legs
Examinelevelinglegsandfinddiamond
marking. Screw legs into leg holes by
hand.Useanadjustablewrenchor1"
(25 mm) hex-head socket wrench to
finishturninglegsuntildiamondmarking
isnolongervisible.Thenfitacoveredfoot
boot over each leg foot.
Toprotectthefloor,usealargepieceofcardboardfromthe
dryer carton. Stand dryer up on the cardboard. Slide the dryer
untilitisclosetoitsfinallocation.Leaveenoughroomfor
electrical connection and to connect the exhaust vent.
Remove cardboard or hardboard from under dryer. Adjust
the legs of the dryer up or down until the dryer is level.
Diamond
Marking
Foot
17