Reversing Dryer Door Swing (Optional) - Sears Kenmore 11091942710 Instrucciones De Instalación

REVERSING DRYER DOOR SWING (OPTIONAL)

Remove the Door Assembly
1. Place a towel or soft cloth on top of dryer or work space
to avoid scratching of the surface.
2. Remove three of the four screws that hold the door hinge
on the front panel of the dryer. Partially loosen the remaining
screwwithkeyholeopeningandliftthedooroff  thescrew.
3.  L aythedoorassemblyonapreviouslypreparedfl  atsurface
with the inside (inner door assembly) facing up, and remove
six Phillips head screws to release outer door assembly from
inner door assembly.
NOTE: It is important that you remove only six indicated screws.
24
4.  L ifttheinnerdoorassemblyoff  outerdoorassembly.
5. Remove four Phillips head screws to release the center insert
from the outer door ring.
6. Lift and rotate the center insert 180.°