Supply Voltage - WIKA LSO.25 Manual De Instrucciones

9. Maintenance, repair and cleaning
Replacing fuse of switching amplifier
Switch net supply off
■
Taking fuse out
■
Use a new fuse only with the value printed on the circuit board

Supply voltage

AC 230 V
AC 115/120 V
AC 24 V
DC 24 V with potential separation
DC 24 V without potential separation
Switch net supply on
■
At spare part orders indicate absolutely exact type, series no. and
commission no. the manufacturer.
9.2 Cleaning
If the glass tip becomes soiled, clean it carefully.
CAUTION!
Before cleaning, correctly disconnect the instrument from the pressure
■
supply, switch it off and disconnect it from the mains.
Clean the instrument with a moist cloth.
■
Electrical connections must not come into contact with moisture.
■
Wash or clean the dismounted instrument before returning it, in order to
■
protect staff and the environment from exposure to residual media.
Residual media in dismounted instruments can result in a risk to persons,
■
the environment and equipment. Take sufficient precautionary measures.
For information on returning the instrument see chapter "12.2 Return".
WIKA operating instructions models LSO.06, LSO.25
Model LSO.06
T 50 mA
T 100 mA
T 400 mA
see marking on circuit board
T 400 mA
GB
31