Tecno-gaz Hydra EVO Instrucciones De Uso página 19

IN THE MANUAL WE ARE IDENTIFYING AS FOLLOWS:
HYDRA EVO 
HYDRA EVO PLUS 
EMPLOYMENT AND USE DESTINATION OF THE AUTOCLAVE
The autoclave must be used to sterilize the instruments that are present in the laboratory,
by following the instruction of the manufacturer for the sterilization of each instruments. It is
important to verify the maximum temperature that is bearable by each instruments. This
equipment can be used in the dental, medical, aesthetic fields and, generally, in all the
fields where the sterilization of the instruments and materials is made This device has been
certified for the sterilization of the following materials:
UNWRAPPED SOLIDS: 4,0 kg / 1,0 kg for each tray
Valid for European countries only
1. INSTRUCTIONS FOR PACKAGE AND STORING
1.1 DISPOSAL
2. TECHNICAL FEATURES
3. SAFETY
3.1
SAFETY MARKING
4. SUPPLIED ACCESSORIES
5. INSTALLATION
6. INTRODUCTION FOR STERILISATION
7. STERILISATION TABLE
8. FILLING OF THE WATER TANK
8.1 CHARACTERISSTICS OF THE WATER TO BE USED
9. EMPTYING THE WATER TANK
10. COMMISSIONING AND PREPARING FOR STERILISATION
11. MAINTENANCE
11.1 DAILY ROUTINE MAINTENANCE
11.2 WEEKLY ROUTINE MAINTENANCE
11.3 QUARTERLY MAINTENANCE
12. MESSAGES OF THE ALARM AND ERROR DISPLAYS
12.1 ASSISTANCE
THE MANUFACTURER RESERVES THE RIGHT TO CARRY OUT IMPROVING TECHNICAL
CHANGES WITHOUT ANY PREVIOUS NOTICE. THIS MANUAL IS A SOLE PROPERTY OF
TECNO-GAZ S.P.A. AND CANNOT BE COPIED, REPRODUCED OR TRANSFERRED TO THIRD
PARTIES WITHOUT THE WRITTEN AUTHORISATION OF TECNO-GAZ S.P.A.
MOD. 1
MOD. 2
4,8 kg / 1,2 kg for each tray
INDEX
ENGLISH
MOD. 1
MOD. 2
1