Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
indicated that the connection is done. The master unit will show "TWS R" and the second
unit will show "TWS L", then these two units will become stereo output.
3. Control of play, pause, next track and previous track can be done by both units. Rotate the
volume knob on each unit to adjust the volume individually.
4. To quit the TWS, press and hold the PAIR(BT)/TWS button on the second unit to
disconnect.
AUX-IN OPERATION
1. Press the FUNCTION button on unit to select the "AUX" mode.
2. Connect your audio device to the AUX IN jack on the top panel of the unit with an AUX IN
cable.(audio cable is not included)
3. Rotate the VOLUME knob on the unit or adjust the volume on the external device to
increase or decrease the music volume to your desired level.
4. Control the playback with your audio device.
MIC JACK OPERATION
Microphone input is available in all modes.
1. Connect your microphone to the 6.3mm MIC JACK found on the top panel of the unit.
2. Press the MIC VOL. +/- buttons on the unit to increase or decrease the microphone
volume.
3. Press and hold the EQ/ECHO Button to turn on or o the echo e ect of the microphone.
Technical Speci cations
GENERAL
Power Requirements
Power consumption
Max. output power
FM frequency
AUX in jack
Microphone jack
Work temperature
Bluetooth
Communication system
Reception Range
Compatible Bluetooth pro les
ACCESSORIES
Instruction Manual
AC Cord
FM Wire Antenna
Note: Speci cations are subject to change for continuous improvement without prior
notice.
EN
AC100-240V~60/50Hz
35W
50W
FM 87.5-108MHz
3.5mm
6.3mm
5°C - +35°C
Bluetooth Standard version 4.2
10 meter (line-of-sight distance)
Advanced Audio Distribution Pro le (A2DP)
x1
x1
x1
17
Publicidad
Tabla de contenido
