Troubleshooting - EXPO Quadro Vino Manual De Instrucciones

To set temperature.
Hold the button for 3 seconds • The set point will be visible and the
or buttons • Press

TROUBLESHOOTING

Problem
Device does not switch on
Cooling is not efficient
Lighting does not work
Controller display is off
If the issue persists, please refer to our website www.exposrl.com and the following links:
Tipo documento
Exploded view www.exposrl.com >> technical area >> parts and exploded
Wiring diagram
User manual
LEGEND: CONTROL ICONS
(Pressed and released): light switch
(Hold 3 seconds): check or set temperature
To raise temperature
To lower temperature
button to set new value or wait 15 seconds to leave setting mode.
Potential cause
Device is unplugged
Ambient temperature is too high
The door is frequently opened
or closed incorrectly
Set temperature is incorrect
The internal heatsink is frozen
The internal fan is blocked
or not working
The switch is in OFF position
Main switch is in OFF position
Percorso
www.exposrl.com >> technical area >> wiring diagrams
www.exposrl.com >> technical area >>
LEGEND: LEDS
LED will start ashing • To set the value press
Check device is plugged in
Eliminate the causes
Non accendere l'apparecchio se la
temperatura ambiente è inferiore a +18 °C.
Turn main switch ON
user instructions QV12 - QV30 - QV40 - QV52 ( MM )
ENGLISH
(Continuous): device is on
(Flashing): setting
(Continuous): defrosting
Solution
Switch it ON
Nome file
QV12 - QV30 - QV40 - QV52 ( EV )
QV12 - QV30 - QV40 - QV52 ( SE )