iwc 3717 Instrucciones De Manejo página 28

Determining bracelet length
Place the watch with its separated bracelet on your wrist
and estimate the number of links you need to remove
(as described above). If you need to shorten the bracelet
by several links, you should remove the same number of
links from each half of the bracelet, if possible, to ensure
that the clasp can be worn more or less at the centre of
the wrist. Keep the surplus links and the separating tools
safely for use in subsequent adjustments.
Attaching the bracelet
upper edge of the securing link. Please be sure to check
the correct seating of the pivot pin.
Attach the component parts of the
bracelet link to the connection point
and push the pivot pin into the brace-
let from the side opposite the mark-
ing (1), until the pivot pin projects by
about 3 mm. Using the special tool
provided, now press the securing pin
downwards (2) and, at the same time,
slide the pivot pin back into the brace-
let until it lies flush (3). The securing
pin must be brought up flush with the