Clamping The Workpiece; Gripp Tips - Allmatic TITAN 2 Serie Manual De Instrucciones

8 | Clamping
8.5

Clamping the Workpiece

8.5.1

GRIPP Tips

Support jaws with GRIPP in-
serts
Fig. 17: GRIPP tips
The conical GRIPP tips (1) penetrate the workpiece and create positive locking. The penetration
depth depends on:
a) the clamping force;
b) the material strength.
With GRIPP clamping up to approx. 1000 N/mm²:
– Unalloyed steel
– Grey cast iron
– Aluminium
– Plastics
the spindle stroke is limited by an end stop (3.5 revolutions or 30 Nm).
66 / 474
Support jaws with universal
GRIPP set (and hold-down)
1
Stepped jaws with GRIPP in-
serts
TITAN 2 (CA) Serie
ALLMATIC