Tecatel CENT TAC 645 Manual De Usuario página 22

Repeat this section to set all parameters
> Turn the button to select the desired mode.
> Push the rotary button to enter the selected mode.
> Inside the mode, turn the button to select the parameter (input, cluster, channels, level ...)
> Push the rotary button to confirm the parameter setting.
Exit programming mode
> Turn the button to select
> Push the button more than 3 seconds to confirm.
> Turn the button to select
> Push the button to confirm.
Note:
The amplifier will go in "stand-by" and will display a dot after 1 minute if the rotary / push button is not activated.
Tecatel
Exit mode.
3 s.
Mode is indicated with
a GREEN colored LED
The LED is now RED
FM B III / DAB
1 UHF Clusters Input and Cluster LED's
2 3 4 5 6
Display
LED returns to a GREEN color.
Exit
Exit
The LED is red and 2 dashes are displayed
Free access
to programming
mode
A dot is displayed
22
The LED is green
or
Access to
programming mode
with security code "50"
GREEN LED
RED LED