Tecatel CENT TAC 645 Manual De Usuario página 23

CLUSTER PROGRAMMING
Setting clusters / UHF input
The amplifier has 2 UHF inputs which are splitted over 6 clusters.
There are three possible configurations :
Input
Number of
Cluster(s)
To set the number of cluster(s) per input:
> Turn the button to select
> Push the button to confirm.
> Turn the button to set one configuration:
1
2
UHF1 cluster indicator
> Push the button to confirm.
Note:
Each non used cluster has to be switched off (Park function).
Set the cluster to channel "00" (see following paragraph "Setting channels / cluster").
UHF1 UHF2
6 0 UHF1 clusters are indicated by the RED LED's n° 1,2,3,4,5 and 6.
3 3
UHF2 clusters are indicated by the GREEN LED's n° 4, 5 and 6.
4 2
Split UHF mode.
UHF2 cluster indicator
3 4 5 6
The LED is green.
Split UHF
The LED is red.
Split UHF
Display of selected configuration:
Input
Number of
Cluster(s)
Split UHF
23
Display UHF1 UHF2
"6.0" 6 0
"3.3" 3 3
"4.2" 4 2
The LED is green.
Tecatel