Tecatel CENT TAC 645 Manual De Usuario página 31

COPY FUNCTION
This function allows to transmit all settings from one unit to another unit or import from the memory stick (optional).
Copy from unit to unit.
FM BIII/DAB UHF 1 UHF 2
12-24 VDC GND
CENT-TAC645
DIGITAL PROCESSOR
DIGITAL TERRESTRIAL COMPATIBLE
230V~ 50Hz
20 VA
DATA TEST OUTPUT
(-30dB)
SLAVE
> Connect master and slave unit with a DSUB9 male/male crossed cable.
> Then connect mains to the units.
> Push the rotary button for more than 3 seconds to enter into programming mode (see page 21).
3 s.
> Turn the button to select the
> Push the rotary button for more than 3 seconds to enter the selected mode.
3 s.
> Push the rotary button to confirm Data Import.
Note:
If a problem occurs during data transmission the display will show an error message:
Possible causes are: wrong type of cable, no cable, bad pin contacts.
All actions have to be
done on the SLAVE unit.
The MASTER unit remains
in Stand-by.
Data
Data mode.
Data
Data
31
FM BIII/DAB UHF 1 UHF 2
12-24 VDC GND
CENT-TAC645
DIGITAL PROCESSOR
DIGITAL TERRESTRIAL COMPATIBLE
230V~ 50Hz
20 VA
DATA TEST OUTPUT
(-30dB)
MASTER
The software version is displayed,
followed by a dot.
The LED is green.
The LED is now red.
"AL "is displayed.
A dot is displayed.
Tecatel