Tecatel CENT TAC 645 Manual De Usuario página 30

To switch on the DC power supply
> Push the button to enter the selected mode.
> Turn the button to select the BIII/DAB input or the UHF cluster.
> Push the button to confirm.
> Push the button to enter the selected mode.
> Turn the rotary button to get DC remote power on selected input or cluster
> Push the button to confirm.
Notes:
When DC is switched on for one cluster , it is not necessary to switch it on the other clusters from the same UHF input.
In case of short circuit , the display shows "SC" blinking.
Remove the short-circuit to restore normal operation of the unit.
Tecatel
Filter-Input mode.
Filter Input
Filter Input
1
2 3 4
Filter Input
DC mode.
with remote power
30
The LED is green.
The LED is red.
5 6
The LED is green.
DC
The LED is green.
DC
The LED is now red
without remote power
DC
The LED is green.