Intended Use; Description; Scope Of Delivery; Technical Design - SATA trueSun Instrucciones De Servicio

Operating Instructions for SATA trueSun
US
Operating parameters
■ Only operate the LED lamp, battery and charger within the parameters
specified on the rating plate.
Cleaning
■ Never use solvents or materials containing solvents to clean the LED
lamp, battery or charger. Always use SATA wet and dry cloths (Art. No.
75358) for cleaning.

3. Intended Use

The LED lamp is used to simulate sunlight shining on painted surfaces.

4. Description

The LED lamp is used to illuminate repainted surfaces. By simulating
sunlight, the LED lamp can detect the finest differences in the painted
surface.

5. Scope of Delivery

■ LED lamp
■ Lithium-ion battery
■ Charger
■ Operating Instructions
After unpacking check whether:
■ LED lamp, lithium-ion battery and charger are not damaged
■ The scope of delivery is complete (see 5)

6. Technical Design

6.1. LED lamp
[1-1] Impact protector for
protective plate
[1-2] Full range dimmer with level
control (not shown)
[1-3]
Protective film pull-tab
[1-4] Button
[1-5] Protective plate with
protective film
[1-6] Battery release

7. Technical Data

LED lamp
284
[1-7] Battery
[1-8] Battery compartment
[1-9] Plug (UK)
[1-10] Plug (US)
[1-11] Plug (EU)
[1-12] LED 1
[1-13] LED 2
[1-14] Bat. Info. button