How To Use - Steren CCTV-088 Manual De Instrucciones

TO CONNECT A SLAVE MONITOR:
Connect the 4 wire harnesses together, matching the colors.
1
On the master monitor, connect the harness to the slave monitor output.
2
On the slave monitor, connect the harness to the slave monitor input.
3
The maximum distance from the master monitor to the slave must be less than or equal to 10 meters.

HOW TO USE

CALL
When a visitor make
sound the bell:
MONITORING
Press to camera
monitoring.
TIPS:
Depending on the mode selected, press
image capture.
To make a recording, use a microSD memory (32 GB max.) Formatted from the
TV porter.
The image captures are saved in the internal memory, whose capacity is 120
images. Additionally, you can make a backup in the microSD memory.
7
The monitor will show
the camera image.
If you need to transmit and receive audio, press
Press to end the communication.
Press to start the
conversation or
to ignore.
to start a recording or to take an
Press to open the
door lock or to end the
conversation.