Measurement Menu - Fracarro SIG7720 Instrucciones De Uso

WARNING: the IP addresses selected for multicasting must be chosen within the 224.0.1.1 -->
239.255.255.255 range.
MULTICAST
OUTPUT
GROUP
MEASURES
Total Bit Rate
5.2.6 OUTPUT MENU
GROUP 1
Enter by
MULTICAST
IP
MULTICAST
PORT
RTP LAYER
ENABLE GROUP

5.2.7 MEASUREMENT MENU

confirm the settings by pressing the
pressing the S key after the modules programmation
SOFTWARE VERS.
TOTAL Kbps
confirm the settings by pressing the
pressing the S key after the modules programmation
Refer to the same
programming menus shown for
GROUP 1 setting
(The maximum MULTICAST
GROUP available are 12)
MULTICAST IP reading
MULTICAST IP
xxx.xxx.xxx.xxx
Exit by
MULTICAST PORT reading
MULTICAST PORT
xxxx
ON
ON
key; save the settings by
key; save the settings by
32
GROUP 12
Increase/decrease by
using the TPE arrow
keys or enter the value
directly from the
keyboard.
__.xxx.xxx.xxx
__.xxx.xxx.xxx
xxx.__.xxx.xxx
xxx.__.xxx.xxx
xxx.xxx.__.xxx
xxx.xxx.__.xxx
xxx.xxx.xxx.__
xxx.xxx.xxx.__
1024 65535
Increase/decrease by
OFF
using the TPE arrow
keys or enter the value
directly from the
keyboard.
OFF
SIG7720 vers. 00
20000Kbps
value
value
value
value
Read-only
Read-only