Operating Steps For Beginners - InMotion SCV V10 Serie Manual De Usuario

5

5.2. Operating Steps for Beginners

 Hold on the unicycle body, and make sure that it is vertical to the ground after startup.
 Open the pedals on both sides. Step one foot on one side of the pedal. The sole shall be stepped on the center of the
pedal.
 The upper body shall be naturally upright, and the eyes shall look straight ahead. Tilt the center of body weight to the
other side of the pedal. Try to get the other foot off the ground to look for the balance point.
 Gradually begin to slowly slide forward by single-foot support, until the unicycle can keep sliding for a long time when
one foot steps on the pedal.
 After keeping the center of gravity balanced when sliding with one foot, you can step both feet on the pedals. Relax
the lower legs on both sides to ensure the balanced driving.
 Your body will go through temporary imbalance during practice, which is very easy to cause the slant of the unicycle
body. It is necessary to lean on the railings or walls during single practice to help you keep your body in balance. You
can also get to know the feeling on the V10 accompanied and supported by a friend, and learn how to drive the
unicycle step by step.
 After gradually familiar with how to steadily drive straight ahead, you can try to change the direction according to the
personal mastery over the unicycle driving by adjusting the center of body weight or controlling your feet to twist
around.
Driving Inmotion SCV V10
Forward
Back
44