6
6.4. Precautions for Cleaning and Use
Before cleaning the unicycle, the body shall be shut down. Charging wire shall be pulled up, and the charging port
shall be closed.
During rinsing, make sure that water does not flow into the battery charging port.
Use a soft cloth dipped with clean water to scrub the outer cover of the V10. Do not use high-pressure water jet to
flush the V10.
The IP rating of the V10 is IP55, which means it is splash-proof and dustproof. Therefore, it is not allowed to dip the
V10 in water, which may cause permanent damage to the unicycle.
Please do not drive in the rainstorm, so as not to fall down or cause damages to the unicycle because of being
soaked in the water.
Please do not place the V10 near the fire source or places with extremely high temperature, so as to avoid battery
damages or even explosions.
Maintenance of the Vehicle
Do not charge below 0ºC.
Place the unicycle in a warm environment (10ºC ~ 35ºC) for charging.
Fully charge the unicycle before storage.
Make sure to fully charge the unicycle at least once a month.
If you hear the alarm sound when riding in a cold environment, please place the
unicycle in a warm environment for at least 30 minutes before riding it again.
Place the unicycle in a safe environment.
The storage temperature is suggested to be not lower than -10ºC and not higher than
35ºC.
50