Time-Delayed Switch-Off; Energy-Saving Mode; End Of Operation; Cleaning - ProfiCare PC-LB 3077 Manual De Instrucciones

Time-Delayed Switch-Off

You can set the appliance to turn off automatically within
1, 2, 4, or 8 hours.
• Press the TIMER button to activate the function. The
display shows TIME and the set time is displayed.
• If you want to deactivate this function, press the button
repeatedly, until the display TIME disappears from the
display.
WARNING:
• Always remove the plug before cleaning.
• Do not immerse the base appliance in water for cleaning under
any circumstances. Otherwise this might result in an electric
shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Do not use any chemical cleaning products.
• Do not damage the ultrasound probe at the bottom of
the base appliance!

Tank

1. Remove the tank from the base appliance.
2. Rinse the tank with clear water.
3. In case of limescale, add about 100 ml of household
vinegar to the cleaning water. Allow the solution to work
for approx. 10 minutes.
4. Remove any lime deposit at the steam nozzle and tank
cap by using some household vinegar.
5. Rinse the tank out once more with clear water.
6. Allow the tank to dry before you close it again.

Base Appliance

• Wipe the casing with a damp cloth. Then wipe it with a
dry cloth.
• The area on which the tank stands should be cleaned
once per week.
1. Pour the remaining water out of the water vessel.
2. Wipe the area with a damp cloth. Use some drops of
household vinegar if necessary, and allow to work for
about 5 minutes.
3. Remove the ceramic filter.
44
PC-LB3077_IM

Energy-Saving Mode

• Press the SLEEP button to switch the appliance to
energy-saving mode. The display goes out.
• As soon as a button is pressed, the display switched on
again and the energy-saving mode is deactivated.

End of Operation

1. Switch off the appliance.
2. Disconnect the mains plug from the socket.
3. Completely empty the appliance if you do not want to
use it for a long period of time.

Cleaning

4. Moisten a cotton bud with vinegar. Use it to carefully
wipe the ultrasound probe until any limescale is
completely removed.
5. Then wipe the appliance once more.

Ceramic Filter

If necessary, clean the ceramic filter under running water.

Foam Filter

1. Open the cover on the bottom of the base unit.
2. Tap out the filter as needed. If there is heavy staining,
clean the filter under running water
3. Allow the filter to air-dry completely before refitting it!
4. Refit the cover. It must audibly snap in.

Cleaning Around the Appliance

If the appliance has been used over a long period, limescale
deposits may occur around the appliance, in spite of the
integrated ceramic filter. Clean the surface on which the
appliance rests and all objects found close to the appliance,
on a regular basis.
• Clean the appliance as described and allow it to dry.
• Pack the filter with the ceramic spheres separately into a
bag when it is dry. Store it in a cool, shady place.
• We recommend that you keep the appliance in the origi-
nal packaging if it will not be used for long periods.
• Always store the appliance out of the reach of children in
a dry, well ventilated place.

Storage

26.09.19