Dmx-Protocol; Cleaning And Maintenance - EuroLite HPS-1500 Manual Del Usuario

DMX-protocol

Mode 1 - RGB
Channel 1 Characteristic
0 - 255 Blue 0-100 %
Channel 2 Characteristic
0 - 255 Red 0-100 %
Channel 3 Characteristic
0 - 255 Green 0-100 %
Mode 2 – Color & Brightness
Channel 1 Characteristic
0 Black (all off)
1 Blue
33 Magenta
66 Red
102 Yellow
133 Green
167 Cyan
255 White (all on)
Channel 2 Characteristic
0 - 255 Dimmer 0 – 100 %
Mode 3 – Color Preset
Channel 1 Characteristic
0 Black (all off)
1 Blue
33 Magenta
66 Red
102 Yellow
133 Green
167 Cyan
255 White (all on)

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
21/43 41601025X98NXS_V_1_0.DOC