Push Handles - Küschall R33 Manual Del Usuario

R33
3.3 Backrest
Backrest cover
You can adjust the tension of the backrest cover as
required.
Adjusting the backrest cover
1. Remove the backrest cushion A.
2. Loosen the Velcro® tapes B on the rear of the
backrest cover by simply pulling on them.
3. Tighten or loosen the tapes as required then reattach
them.
WARNING!
Risk of tipping
If the bands are set very loose, the tipping point
of your wheelchair is changed for the worse.
– Ensure that the bands are set correctly.
12

3.4 Push handles

IMPORTANT!
– Always check the push handles before using
the wheelchair, as to whether the hand grips
are secure, cannot be turned and cannot be
pulled off.
Foldable push handles (optional)
1. Fully depress button A and fold up respectively fold
down the push handle B until it audibly engages.
CAUTION!
If not correctly engaged, the push handle
could accidentally fold down while pushing the
wheelchair.
– Make sure that the push handle is correctly
engaged.
1583557-D