Air Pump; Passive Illumination - Küschall R33 Manual Del Usuario

Adjusting the length
The posture belt has the good length, when there's
just sufficient space for a flat hand between body
and belt.
1. Shorten or extend the loop D as required.
2. Thread loop D through catch A and plastic buckle E
until the loop is flat.
If this adjustment is not sufficient, it might be required to
re-fit the posture belt at the fixations.
Fitting the posture belt at the fixations
CAUTION!
– Thread the belt loop through both plastic
buckles to avoid the belt from loosening.
– Do the adjustments on both sides equally,
so that the buckle clasp remains in a central
position.
– Make sure that the belts do not get caught in
the spokes of a rear wheel.
1583557-D
1. Thread the loop F through the fixation on the chair G
and then through BOTH plastic buckles H.

4.2 Air pump

The air pump is fitted with a universal valve connection.
1. Remove the dust cap from the valve connection.
2. Push the valve connection onto the open valve on the
wheel and pump the wheel up.

4.3 Passive illumination

You can attach reflectors to the rear wheels.
Accessories
17