Phonic i2600 Manual Del Usuario página 12

If you selected the "Sub Harmonics" at point 9.
10.B. Input A/B SH
Sub Harmonics
-> Sub_H Byp = Off
Output Channels Editing
By pushing and holding the 1, 2, 3, 4, 5 and 6 output channel buttons for at least 2 seconds, you can access the different parameters for
their respective output channels.
NAV/PM1 Encoder
[to navigate between menus]
1. Output[x] [Name] Name
Name = [Name]
-> Name = _
2 Output[x] [Name] Source
Source = InA
-> Source = InA
3. Output[x] [Name] Gain
Gain = + 0.0 dB
-> Gain = + 0.0 dB
4. Output[x] [Name] RMS Cmp
Thr: +12.0dBu Rto: 1:1
-> Thr: +12.0dBu Rto: 1:1
5. Output[x] [Name] RMS Cmp
A: 5ms R: 0.2s Kn= 2%
-> A: 5ms R: 0.2s Kn= 2%
8
-> Sub_H Byp = Off
-> Sub_H Mix = 50%
-> Sub_H Filter = 24-36Hz
NAV/PM1 Enc.
[to chose values for the parameters, no need to confirm the chosen values,
which are automatically loaded during the encoders use]
(For Editing the Device's Name, refer to the Details on the"Utility Menus Use" Section)
PM1 N/A.
PM1 N/A
PM1 N/A
[Atk time] 5ms
:
200ms
On Same as PM2
Off
0 Same as PM2
:
100% Same as PM2
24-36Hz Same as PM2
36-56Hz Same as PM2
PM2 Enc. PM3 Enc.
InA (Channel A) Same as PM2
InB (Channel B)
InA+InB (Channel A+ Channel B)
-15 db Same as PM2
:
+15 dB
[Threshold] +20.0dBu
[Ratio]
:
-10.0dBu
[Rel time] 0.1s [Knee.] Hard (00%)
:
3.0s
:
:
1:1
:
32:1
:
Soft (100%)
i2600