MICROWAVE OVEN INSTALLATION
Preparation
Remove all packing material and accessories. Examine the oven for any damage such as
dents or broken door. Do not install the microwave oven if it is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surface.
Do not remove the light brown Mica cover that is attached to the inside of the oven
cavity to protect the magnetron.
Position
Select a level surface that provides enough open space for the intake and/or outlet
vents.
The microwave oven must be placed on a surface with height more than 85 cm above
the floor.
A minimum clearance of 20 cm is required on both sides of the oven.
The minimum height of free space above the top surface of the oven is 30 cm.
Do not remove the feet from the bottom of the oven.
Blocking the intake and/or outlet openings can damage the oven.
Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to your radio or TV reception.
Plug your oven into a standard grounded outlet. Be sure the voltage and the frequency
are the same as the voltage and the frequency on the rating label.
WARNING: Do not install the oven over a range cooktop or other heat-producing
appliance. If installed near or over a heat source, the oven could be damaged and the
warranty would be void.
GB
10