Nailer Operation - Hitachi Koki NT 65A3 Manual De Instrucciones

(3) 1 Pull the nail feeder up in backward direction and remove it from the roll pin.
2 Slide the nail feeder forward until it contacts nails.
NOTE:
● Use nails at least 5 nails remaining.
● Slide the nail feeder SLOWLY forward.
If the nail feeder is released roughly, it may be stuck between the magazine and nails,
which makes mis-feeding trouble.

NAILER OPERATION

Read section titled "SAFETY"(pages 4 – 7).
● NEVER point tool at yourself or others in work area.
● Keep fingers AWAY from trigger when not driving nails to avoid
accidental firing.
Nail Feeder
Roll pin
DANGER
● Operators and others in work area
MUST wear safety glasses with side
shields which conforms to ANSI Z87.1
specifications.
WARNING
English
17