Publicidad
Idiomas disponibles
Idiomas disponibles
Setting your watch correctly
Set your watch correctly as follows:
• Release the crown by rotating it to the left.
• Wind the movement until it is fully wound (about 30 revolutions of the
crown).
• Pull the crown to position 1.
• Rotating the crown to the right causes the date indicator to change in
steps. Set yesterday's date.
• Rotating the crown to the left causes the day indicator to change in
steps. Set yesterday's day.
• Pull the crown to position 2, and this will stop the movement.
• Turn the hands forwards until the date indicator changes to today's date.
The hands will now be positioned between 0.00 and 1.00 in the morning.
• Now set the precise time by turning the hands forwards; in the afternoon,
the hands must be turned past 12.00 (noon) once again.
• Push the crown back to position 0 to start the watch movement.
• Now push the crown to position X and secure it by rotating it to the right
at the same time.
Important: Although the watch is water-resistant in positions 0, 1 and 2,
the crown must nevertheless always be screwed down again for normal use
(position X).
Publicidad
