Before Using The Appliance - Unold 48645 Instrucciones De Uso

cables. When using a cable
drum, the cable has to be
completely unrolled.
18. The plate becomes very hot
during operation. If possible,
only connect the plate when
a filled pot is placed on it.
19. The heating plate and the
pot surface become very
hot during operation. Please
remember that they main-
tain the heat during some
time after
Avoid any contact with hot
surfaces and never grab
anything from a hot pot. If
necessary, use potholders.
20. Make sure that the oil does
not overheat. In case the oil
catches fire by overheating,
disconnect the plug from the
wall socket and cover the pot
with a lid or similar in order
to put out the flames.
21. Never put water into hot or
burning oil!
Attention:
The appliance becomes very hot during operation and maintains
the heat during some time after disconnection.
Never open the housing of the appliance. There is danger of
electric shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

BEFORE USING THE APPLIANCE

1. Remove all packaging material.
2. Before the first use, please wipe
the heating base with a damp
cloth. Clean all detachable parts
(stainless steel pot, ceramic pot,
splash guard, forks) in warm water
22
disconnection.
Copyright UNOLD AG | www.unold.de
22. When transporting the appli-
ance, always remember that
boiling fat can cause severe
burns. We recommend not
to transport the appliance
when the pots are filled with
hot liquids, but put it up at
its place of use and heat up
oil, bouillon etc. there.
23. Do not use the appliance
with accessories of other
manufacturers or brands, to
prevent damage.
24. Check the plug and lead
cable regularly for wear and
damage. If the lead cable or
other parts show damage,
please send the appliance
to our after-sales service
for inspection and/or repair.
Unauthorised
constitute serious risks for
the user and void the war-
ranty.
with a mild washing-up liquid.
Dry all parts thoroughly with a soft
cloth.
3. Place the plastic ring on the hea-
ting base, making sure that it fits
perfectly and latches into place.
repairs can